Toyota Corolla 2003-2008 Rear Inner Tail Signal Light Right Passenger Side Assembly

You may well have to adjust the headlights after installation. If it's possible, when you take the old assembly out, you should match up the new adjusters with the old ones. Adjust the new light as close to that on the old units as you can. That way, any adjustments you have to make on the car once they are installed will be minimal. Our headlight assemblies have the same or improved adjusters as the stock units, and there are many videos on Youtube on how to adjust lighting. Check your owners manual too, since not all vehicles are adjusted the same way. Finally, when adjusting, make sure your car is level, with a full tank of gas.

HID stands for "High Intensity Discharge". These bulbs use an electric arc rather than the glowing filament in a Halogen bulb. HID headlamp bulbs do not run on low-voltage DC current like a Halogen Bulb, so they require a ballast, which controls and regulates the flow of current. This ballast will require an ignitor to light the bulb. This is either integrated directly into the bulb or as a separate unit which is occasionally part of the ballast, similar to fluorescent bulbs in your home. In a vehicle, HID bulbs tend to be much more expensive to replace than a Halogen bulb.

Installing new headlights on your vehicle can result in fitment issues if they are improperly installed. Many times an alignment post is not inserted correctly, or a bracket is not tightened to the correct torque. In other cases, the incorrect part is being installed. We want to know if you have any installation issues with your new parts as soon as possible, so that we can help you figure out exactly what is wrong. Please contact us so we can help you save time with any questions you might have if something does not appear to fit correctly..